Nearly every home in America has a powerful and primed source of fire at this very moment, and it’s called electricity. From overloaded outlets to dated or defective wiring, there’s likely to be at least one electrical fire hazard in some corner of your home.
The United States Consumer Product Safety Commission reports that faulty electrical wiring in residential homes cause over 40,000 fires each year. Over the last decade, defective electrical wiring has caused an average of 350 deaths per year.
According to the National Electrical Safety Foundation, homeowners can use the following fire prevention tips to help create a fire-proof home electrical system:
* Use child-proof outlets to prevent small children from sticking an object into the outlets.
* Do periodic checks of all electrical cords, replacing any damaged or frayed ones, untangling knotted cords, and ensuring that none have been placed under carpets or rugs.
* Never overload outlets or extension cords. Although not always present, it could be a sign of an overloaded circuit if your appliances aren’t working up to par, the television has a poor picture, the HVAC isn’t performing properly, and/or the lights are dimming on their own. You might also ask an electrician to tell you what the maximum capacities are for the circuits in your home. By knowing this, you can add up the wattage of all the electrical devices plugged into each circuit and be able to ensure that the total load for each circuit is below its maximum capacity.
* Consider updating the entire electrical system with copper wiring in homes 40 or more years of age. Older homes with dated aluminum wiring are more prone to electrical fires than those with more fire-resistant copper wiring.
* Use the proper wattage bulb for every light fixture and lamp in your home, ensuring that you never exceed the recommended wattage.
* Arc fault circuit interrupters (AFCI) can be installed to help protect against electrical fires caused by arc faults, which are simply electrical currents being discharged across a gap. Wire insulation that’s pinched, overheated wires, and improper electrical connections are common sources of arc faults.
* Ground fault circuit interrupters (GFCIs) can be installed in your bathrooms, utility room, and kitchen to help protect your family from the risk of electrocution. GFCIs will detect any imbalance in electricity and shut down the electrical system.
* Use a power surge protection device for your computer and other large electronics. Electrical devices plugged into a circuit that receives a power surge, or sudden rush of voltage, can be damaged beyond repair.
Of course, despite all precautions, you still need to know what to do should an electrical fire start.
For an electrical fire at a wall outlet, you can either turn off the main switch -or- if you can do it safely, immediately try to pull anything that’s plugged into the outlet out by pulling on the end of the cord furthest away from the outlet. CO2 fire extinguishers can be used for small electrical fires, but do remember never to use water on an electrical fire.
In the event the electrical fire is large or otherwise uncontrolled, then you should evacuate the home and immediately alert the fire department that you have an electrical fire. It’s important that you tell the fire department if you suspect the fire could be electrical since they may be able to shut off the main power source and prevent it from spreading.
Contact us to see if you can save money on your insurance by speaking to a professional independent insurance agent at Journey Insurance.
Let us sift through the hundreds of insurance programs to find you the most competitive rates available. Let us do the paperwork while you spend your time doing something you actually enjoy!
Journey Insurance Agency * Irvine, California * 888.323.7480
More from my site